<%@LANGUAGE="JAVASCRIPT" CODEPAGE="1252"%> Untitled Document
1. How do I connect the iLo DVD Recorder to my TV that does not have the standard (Red / Yellow / White) AV input connections?
You need to separately purchase an RF modulator (Radio Frequency Modulator) to connect your TV to the iLo DVD Recorder. RF Modulators can be purchased in any Wal-Mart or most electronics stores. Instructions for connecting your DVD Recorder using an RF Modulator are as follows:

ILO DVD recorder >>> (A/V cable- three color coded ends red/yellow/white) >>> RF modulator >>> coaxial cable >>> TV

1. Plug your iLo DVD recorder’s color coded A/V cables (red / white / yellow) into the color coded output on the DVD Recorder. Connect the other end of the A/V cable into the color coded AV input on the RF modulator.
2. Connect the RF modulator coaxial output to your TV coaxial input using a coaxial cable (not included).
3. Select either the channel 3 or 4 output on the back of the RF modulator (depending on your TV).
4. When you want to use your DVD recorder; select either channel 3 or 4 on the TV (same channel as RF Modulator), then turn on the DVD recorder. The RF modulator will automatically pass the video and audio signals through to your TV.
2. Basic Cable / Satellite and TV Installation ( Click for large view)
3. DVD Recorder / Component Connection ( Click for large view)
4. Basic Installation for TVs without A/V (RCA) Connection. An RF Modulator is required. ( Click for large view)
5. Installation with an S-Video Connection ( Click for large view)
6. DVD Recorder / VCR / Cable Box Connection ( Click for large view)
For DVDR05 product information and service please go to: www.iloservice.com